No Cable Schedule (2024)

FAQs

Why has the TV guide stopped working? ›

Check your aerial cable is plugged in securely to your TV or set top box and that the connections are not loose. Check that there is no damage to your aerial cable. Step outside and perform a visual check from the ground to see if your aerial and external cables appear to be in good working order.

Press Guide on your remote. This button is usually labelled as Guide, EPG (Electronic Program Guide), or will show as a box with two horizontal lines inside. You can also get to the TV Guide from the home screen via the menu options at the top of the screen.

Check all equipment for loose or damaged cables. Networks are sometimes retired, renamed or move to different channel numbers. Check your channel lineup for the latest info and search for channels by name or filter by package. If you don't remember which TV package you have, it's noted on your bill.

These channels use your aerial to populate the now and next part of the guide. If you're seeing the words 'No information available' it sounds like you have an aerial reception issue. Try our steps for a weak or lost signal for help with this. You can also take a look at how to improve your signal.

News Corporation sold TV Guide to the United Video Satellite Group, parent company of Prevue Networks, on June 11, 1998, for $800 million and 60 million shares of stock worth an additional $1.2 billion (this followed an earlier merger attempt between the two companies in 1996 that eventually fell apart).

Unlike most other NPCs, the Guide spawns upon world creation, before a house is available. He will, however, move into the first house built. If he is killed, a proper house will need to be built before he can respawn, but has no additional requirements.

If you are experiencing picture break up or missing channels, your problem might be a reception problem and not due to interference. Therefore, you may just need to manually re-tune your television, this can often solve a number of common problems.

Check your HDMI cables and connections - Make sure that everything is seated in the right place, plugged in where it should be, connected properly. And also - as simple as it sounds - check that the power to your source device is switched on of course.

Check Region and Time Zone Settings: Ensure that your TV's region and time zone settings are correctly configured. Incorrect settings can affect the guide's ability to retrieve accurate information. Rescan Channels: If you're using an over-the-air antenna or a cable/satellite box, try rescanning for channels.

Why does my TV guide say no data available? ›

If your cable box states "No Data Available" on your program guide, disconnect the power from the box for about 30 seconds. Plug the box back up and wait for the time to appear on the front of the box before turning the power to the box back on. This should refresh the program guide data to the box.

If you watch TV using an antenna, disconnect the antenna coaxial cable from the antenna wall socket, then reconnect it. Note: If your TV is connected to a separate over-the-air antenna, you can use the signal strength information to adjust the antenna for increased signal strength and improved HD channel reception.

Many issues, including channels missing from the guide, can be fixed by refreshing (reauthorizing) your receiver. To refresh: Go to My equipment & services. Review the equipment you have and identify the impacted receiver(s).

If you are experiencing picture break up or missing channels, your problem might be a reception problem and not due to interference. Therefore, you may just need to manually re-tune your television, this can often solve a number of common problems.

Finding a specific channel may be difficult if there is ongoing signal construction in a nearby area, or if the digital broadcast signal is weak. This is not an issue with your TV. If the symptom persists, please contact your service provider.

If your cable box states "No Data Available" on your program guide, disconnect the power from the box for about 30 seconds. Plug the box back up and wait for the time to appear on the front of the box before turning the power to the box back on. This should refresh the program guide data to the box.